Hall effect ASIC closed loop sensors performing at high peak measurements (up to 3 times the nominal value), low offset drift down to 3 ppm/K (Offset drift 7 times better than previous generation of C/L Hall effect current sensors working with traditional Hall effect chip), -40°C to +85°C, Reference access, Aperture or integrated primary conductors, Overcurrent detection output, PCB mounting, + 5 V power supply
LZSR 100-P
100 A nominal, 270 A peak measurement, Low offset drift 3 ppm/K, -40°C to + 85°C, ?Reference access, Designed with an aperture to insert the primary conductors
- シリーズ
-
LZSR-P
- 測定
-
電流センサ
- 公稱値
-
100 A
- 測定範囲
-
270 A
- 二次公稱信號
-
電圧
- 二次公稱信號値
- 瞬時 2.5 +/- 0.625 V
- 一次信號
-
AC + DC
- 電源電圧
-
外部DCユニポーラ
- 精度
- 0.83 %
- 動作溫度
- -40 °C / 85 °C
- 技術
-
クローズドループ?ホール効果
- 取り付け
-
基板
- アプリケーション
-
ドライブ電源再生可能エネルギー溶接
相対情報
同じシリーズの製品
LZSR 150-P/SP1
150 A nominal, 450 A peak measurement, Low offset drift 3 ppm/K, -40°C to + 85°C, ?Reference access, Designed with an aperture to insert the primary conductors
LZSR 200-P/SP1
200 A nominal, 450 A peak measurement, Low offset drift 2 ppm/K, -40°C to + 85°C, ?Reference access, Designed with an aperture to insert the primary conductors
LZSR 80-P
80 A nominal, 270 A peak measurement, Low offset drift 3 ppm/K, -40°C to + 85°C, ?Reference access, Designed with an aperture to insert the primary conductors
LZSR 150-P
150 A nominal, 270 A peak measurement, Low offset drift 3 ppm/K, -40°C to + 85°C, ?Reference access, Designed with an aperture to insert the primary conductors