• 低功耗、多功能輸出型積分器

    用于羅戈斯基的LEM集成器

    MULTI-OUTPUT DIGITAL ROGOWSKI INTEGRATORS

    LEM provides several Rogowski coil integrators to complement its flexible clip-around coils ART and ARU families.

    The AI-PMUL Rogowski coil integrator design is based on digital processing to give combined dynamic range, accuracy, and versatility of use. It offers a wide range of output signals both RMS and instantaneous. AI-PMUL can be stacked for multiphase application without spacing.

    AI-P1A Rogowski coil signal conditioner provides a 1 A output instantaneous signal to replace conventional current transformer with dynamic extended range.

    AI-P1A and AI-PMUL can be stacked up to 3 Integrator modules and use only one power supply for multiphase application without spacing.

    Both LEM integrators for Rogowski Coils?are DIN rail mounted.

    低功耗、多功能輸出型積分器

    LEM AI-PMUL

    主要特性:

    • 羅氏線圈配套積分器
    • 對羅氏線圈二次側輸出信號進行積分處理
    • 線性誤差低于0.1%
    • 與LEM的ARTARU系列羅氏線圈產品配套,為用戶提供計量和監測解決方案
    • DIN導軌安裝

    參數:

    • 從100A到5000A有12種原邊電流量程可選
    • 可配套從22.5mV/KA到120mV/KA 6種輸出的羅氏線圈?
    • 6種輸出類型可選: 4種真有效值輸出0-20mA, 4-20mA, 0-5V & 0-10V和2種瞬時電壓輸出0-225mV and 0-333mV
    • 可以通過2個按鈕進行設置
    • 兩種顏色LED燈指示配置狀態
    • 工作溫度-25C 到+70°C
    • 單電源供電:+24V

    備注:

    • 測量小電流時建議選用SMA同軸電纜接頭
    • 3個積分器可以用一個連接器連在一起共用一個電源
    • 1A瞬時電流輸出型積分器將在近期上市

    INTEGRATOR AI-PMUL SERIES DOWNLOAD & TECHNICAL CHARACTERISTICS

    Product Document Nominal Value Op. Temperature Output current
    (True RMS)
    Output voltage
    (True RMS)
    Output voltage
    (Instantaneous)
    AI-PMUL Datasheet
    3D
    User guide
    100 A – 5000 A -25 °C / 70 °C 0-20 mA or 4-20 mA 0-5 V or 0-10 V 0-225 mVac or 0-333 mVac

    INTEGRATOR AI-P1A SERIES

    ai-1pa integrator rogowski coil

    Main characteristics & benefits

    • Compact design for DIN rail assembly
    • High accuracy Class 0.5 (IEC 61869-2)
    • Setup by user via Select / Edit buttons
    • Clear status indication via bi-color led
    • Over-temperature protection function.

    Features

    • Accuracy Class 0.5 (IEC 61869-2) (1)
    • Linearity error ≤ 0.10 %
    • Protection degree IP2X
    • 35 mm DIN rail mounted
    • Push-in terminals
    • 1 A instantaneous output signals
    • 6 selectable sensitivities depending on Rogowski coil from 22.5 to 120 mV/kA
    • 12 selectable ranges from 100 to 5000 A
    • Ambient operating temperature: 25 °C to +70 °C.

    Typical applications

    • MV/LV substations: transformer condition monitoring
    • Power measurement: current measurement for active power calculation
    • Building sub-metering: energy efficiency monitoring, consumption analysis and cost allocation
    • Power quality monitoring: electrical loads and distribution system equipment
    • Fault Detection, Isolation and Repair (FDIR)
    • Remote Terminal Units (RTU)
    • Automation
    • Smart Grid

    SMA coaxial connector for small current measurement is proposed as option.

    Just like AI-PMUL, 3 AI-P1A integrators can be stacked together to share a single power supply.

    INTEGRATOR AI-P1A SERIES DOWNLOAD & TECHNICAL CHARACTERISTICS

    Product Document Nominal Value Op. Temperature Selectable sensitivities
    AI-P1A Datasheet
    3D
    100 A – 5000 A -25 °C / 70 °C 22.5, 70, 80, 85, 100, 120 mV/kA

    INTEGRATORS FOR ROGOWSKI COILS – ASK FOR SAMPLES / QUOTATION

    Looking to receive samples or a quotation? Please click on the contact button below and provide us with the information you need on this product series. Our sales team will get back to you shortly.

    Contact Us

    天天摸天天爽天天澡视频